Vikmall.com

One of the great advantages of making your own wine is that you are able to take control of as much of the process as you want. If you want to grow and harvest your own grapes or any other kind of fruit and produce wine you can control every aspect of the process. If, on the other hand, you choose to purchase grape concentrate, you can begin making your wine from that point on. Making wine is largely about making a number of different decisions and taking various factors into consideration. Each factor and each decision will have an impact on your final wine.

One of the first choices you will need to make if you elect to make grape wine and use fruit in order to do it instead of concentrate is whether you want to de-stem the grapes or use the entire cluster. When making this decision it is important to keep in mind that it really does make a difference. If you decide to use the whole cluster then you will find that your wine has a certain flavor and even nuance that is not present if you de-stem the grapes first. This flavor may or may not be appealing to you. Some people describe it as somewhat ‘green.’ If you like that sort of flavor, then using a whole cluster is an excellent choice. A number of very good, award winning wines are produced using the entire cluster. If; however, you do not think you would like that flavor, then it is best to go ahead and de-stem the grapes before you use them for your wine.

Another choice you will have to make is how you want to ferment the must. Yes, there are choices to make here as well. You have two basic choices. You can either ferment in a barrel or a tank. Most winemakers prefer to ferment using a tank. This gives you greater control over the process because the sleeves on the tank give you the option to either heat or cool the must. For example, in the beginning of the fermentation process you may wish to ensure the tanks are cool in order to extract the color from the grape skins. This can also help to stabilize the wine. Of course, you can also choose to ferment your wine in a barrel. This is a popular method when producing white wines because it tends to give them some character that might not be possible from tank fermentation. In the end, it is really up to you and your personal choice, but you will need to make this decision before you produce your first batch of wine.

You will also need to give some thought to the types of yeast that you wish to use. Most beginning winemakers are not aware of the fact that grapes picked straight from the vineyard actually have yeast on them. These are naturally occurring yeasts.  As a result, you may choose not to add any additional yeast to the fermentation mix. In this case, you can allow the natural or native yeasts to work on their own. The one downside to this problem is that you may run into a problem known as a stuck fermentation. This is when the yeast reaches a certain point and then it just simply stops. Generally, yeasts that are created in the lab will be more stable. Of course, there is a downside to this as well. Many winemakers feel that lab created yeasts are lacking in flavor when compared to natural yeasts.

If you do choose to use natural yeasts, you will need to be prepared to handle a stuck fermentation in the event that it does occur. Adding a yeast nutrient or energizer can often help to combat this problem by providing the natural yeasts the ‘kick’ they need to finish the fermentation process.

Finally, you will need to give some thought to whether you wish to filter or not filter your wine. There is no set rule regarding this matter. You may find that a wine that has been unfiltered will have a great amount of richness; however, do be aware that there are bacterial issues which may arise if you choose not to filter your wine. In addition, wines that have not been filtered tend to have a cloudier appearance than those that have been filtered.

Author : Zul Affandy
Article From http://www.vikmall.com

If you are a true wine connoisseur, the next step in appreciating a fine wine may be to make your own wine at home. While the process may seem to be complicated, wine can be made rather easily at home. Before beginning the process of making your own wine at home it is important to understand the basic steps of winemaking.

In order to make wine at home you will need either grape concentrate or grapes. If you have a sufficient growing area, you may choose to grow your own grapes and make wine from that. If you choose to use grape concentrate, keep in mind that you will need to use high quality grape concentrate. This can be purchased online as well as in wine and home brewing stores. In addition, you will need yeast and brewing equipment. If this is your first batch of wine you may wish to consider purchasing a wine kit rather than buying all of your equipment separately. After you have had a chance to experiment with making wine at home and decided whether it is an endeavor you wish to continue you might then begin accumulating various pieces of equipment for brewing larger batches of wine.

There are five to eight basic steps involved in the process of making wine, depending on whether you are using grapes or concentrate. If you are using grapes then the fruit will obviously need to be harvested first. After the grapes have been harvested, you will then need to remove the stems from the grapes. This is an absolutely essential step as very bitter tannins are contained in the stems that can have a heavy influence on the wine.

After the stems have been removed, the skins of the grapes will then need to be broken in order to release the juice from the fruit. There are certainly many different ways in which to do this. Crushing is the preferred method for most winemakers. The degree to which the fruit is crushed will have an impact on the resulting wine. If your goal is to create a wine that has a fruity aroma then you may wish to leave the berries almost completely intact.

The next step is known as the primary fermentation. During this step the yeast cells contained in the wine will feed on the sugars. Alcohol and carbon dioxide is produced as a result. In some cases, you may wish to add additional yeast. This helps to ensure a stable and consistent conversion which may not be the case if you rely solely on the yeast that is found on the fruit itself.

After the primary fermentation, more juice will need to be extracted from the fruit. It should be noted that the juice that is extracted in this step is typically not as high of a quality as the juice that is extracted during the crushing phase. This is because the juice that is obtained during crushing, known as free run juice, has had less contact with the stems and skins. This does not mean that press juice is useless; however. Even large wineries may choose to use press juice in order to increase their yield.

A secondary fermentation occurs after the pressing, at the same time as the wine is aging. As the winemaker, it will be up to you to determine how long the wine should ferment.

Blending is an optional part of the process; however, one which can assist you in creating a highly customized wine. Blending is most commonly used in order to improve two or more batches which may be slightly lacking.

The last step of the process is bottling. The wine is poured into bottles and at times you may wish to add sulfites in order to help end fermentation as well as to preserve the wine. Finally, the bottle of wine is sealed with a cork.

Making wine at home can be a very enjoyable experience. As you learn more about the process of making wine, you will likely gain a more thorough appreciation of wine.

Author : Zul Affandy
Article From http://www.vikmall.com

As we all know, fermentation is one of the critical stages of winemaking. Without fermentation, it is impossible to create wine. In some cases; however, you may find that you have problems with the fermentation process. Usually, these problems will take the form of either fermentation that just does not occur at all or else is too slow.

One of the reasons that this may occur is that the temperature was either too cold or too hot. Remember that yeast cells are live and in order to become activated they require a temperature that is between 70 and 85 degrees Fahrenheit. Ideally, you should aim for around 72 degrees; however, if you drop below 70 or go above 75 degrees, you will have problems. When the temperature is too cool, the fermentation will likely not occur at all. When the temperature is too warm; however, the yeast can become damaged and will also perform poorly.

This is why it is critical to ensure that you have a stable temperature in the room where you ferment your wine. If the temperature in the room fluctuates, you will generally have problems. Basements tend to make the best places for fermentation; provided the area does not become too cool during the winter. In that case, you can provide a small heat source. Making sure that your fermentation containers are not placed directly on the floor may also help. You can also use a thermometer to monitor the fermentation. A floating thermometer can be placed right in the wine and you can lift it out when you want to check the temperature.

Improperly starting the yeast can also result in problems with fermentation. This is also commonly due to problems with temperatures. Most yeast packets require the yeast to be rehydrated, or moistened, with some warm water prior to use. Ideally, this should not cause any problems. That is, unless the water temperature was too warm. Most yeast packets call for the temperature to be somewhere between 95 and 105 degrees. If the water exceeds these temperature limits even just a small bit, the yeast is likely to be destroyed. As a result, it is unable to support the fermentation process.

As a result, it is important to make sure that you actually verify the temperature of the water before you add the yeast. In addition, it is important to make sure that you do not leave the yeast in the water for too long. Generally, you will need to leave the yeast in the water for about fifteen minutes. If you walk off and forget about the yeast and leave it in the water for even a few minutes longer, you will also run the risk of destroying the yeast cells. Therefore, it is important to keep an eye on the clock and make sure that the yeast does not remain in the water for any longer than 15 minutes at the most.

Adding too much sugar can also cause problems in the fermentation process. Remember that while it is necessary for yeast to have sugar in order to produce alcohol, you can add in too much sugar. When the sugar level is too high, it may begin to have a detrimental effect on the ability of the yeast to produce alcohol. This is why it is critical to verify the amount of sugar that is already present in a batch from the fruit itself before you add in any additional fruit. Remember that the fruit itself will have its own amount of sugar. This level can vary from one fruit to another, making it even more important to verify the sugar content level. A hydrometer can be used for this purpose. If you have not previously used a hydrometer it is a good idea to invest in one and become acquainted with it. A quality hydrometer can help you to avoid many of the problems that might otherwise ruin a good batch of wine.

Author : Zul Affandy
Article From http://www.vikmall.com

As you contemplate the prospect of making your next batch of wine you will need to decide whether you want to use fruit, such as grapes, or packaged fruit juices. Packaged juices are known as concentrates and can be easily purchased online as well as in home brewing stores. There are many advantages to using concentrates, including the fact that they come with easy to follow directions and usually all of the extra ingredients you may need. Many novice winemakers feel that concentrates are a great introduction to the process of winemaking. There are also advantages to using fruit rather than concentrates; however. The main advantage to using fruit is that you have more control over the process, and thus the results, when you use fruits.

For the most part, the process of making wine from fruit is similar to making it using concentrates. There are a few differences; however, and those differences are critical.

Before you begin, you will need to make sure that you have plenty of fruit. It is not uncommon for many novice winemakers to think they have a sufficient amount of fruit when in fact they do not. You will need at least 70 pounds of grapes in order to produce six gallons of wine. This is the equivalent of about two bushels. The one exception to this is if you are using wild grapes such as Muscadine. In that case you will only need about 25 pounds of grapes due to the fact that wild grapes tend to have a stronger flavor as well as more acid.

Since you will be dealing with a large amount of grapes, you will need to make sure that you have sufficient facilities to deal with them properly. Before you are able to use them to make wine, you will need to remove the stems as well as crush the grapes. Later, the grapes will then need to be pressed after they have had a few days to ferment.

You can easily remove the stems as well as crush the grapes by hand. For small batches of grapes, you can use something as simple as a potato masher to crush the grapes; just make sure it has been cleaned and sanitized first. If you are dealing with larger amounts of grapes it may be worth it to go ahead and invest in a grape crusher as this will speed the process along.

As previously mentioned, after the grapes have fermented for a few days, you will need to press the pulp in order to extract as much juice as possible. In the event you are making white whine, the grapes will need to be pressed directly after they have been crushed but before the first fermentation.

When working with fruit rather than concentrate you will also need to have a hydrometer on hand in order to assist you in controlling the sugar level. As you may recall, this essential in determining the alcohol level in the final wine so it is a step that must not be overlooked.

An acid test kit may also be helpful in controlling and monitoring the levels of acid that are present in your wine when you are using fruit rather than concentrate. When the acid level in the wine is too high, the resulting wine will typically have a taste that is too sour or sharp. If there is not enough acid; however, the wine may taste somewhat flat. An acid test kit will provide you with accurate readings and help you to determine whether you need to add water or acid blend for balance.

Author : Zul Affandy
Article From http://www.vikmall.com

Most people commonly associate wines with grapes; however, it is entirely possible to make wines from fruits other than grapes. The production of wine using fruits other than grapes has become quite commonplace as the hobby of home winemaking has become more pronounced in just the last few years.

The process of making wines from various types of fruit is no more complicated than making wine from grapes. The only difference between making wine using grapes and other fruits is the fact that you may need to make some adjustments when using other fruits including sugar content and acid levels. This will mean a couple of extra steps that may not usually be necessary when making grape wine; however, winemakers who have made the decision to use different fruits report that the extra effort is well worth it as you can often produce a stellar wine.

Any number of different fruits may be used for making wine including peaches, watermelons, plums, strawberries, blackberries, boysenberries, gooseberries, pears, grapefruits, persimmons, pineapples and much more.

The first step in making wine using other types of fruit is the same as making wine using grapes. You will need to evaluate the fruit. Keep in mind that the resulting wine cannot be any better than the fruit that was used to produce it. This means that you will need to pay careful attention to the quality of the fruit that you use to make your wine.

Avoid fruit that contain excessive bruises and molds. Try to use only fruit that is completely ripe. Fruit that is not fully ripe tend to produce wine that is somewhat lacking in character. Make sure that you rinse off the fruit before the crushing.

In some cases, you may need to dilute the fruit with water in order to get a good wine. This is because certain types of fruit are too strong on their own without dilution. Other fruits have a level of acid that is too high without dilution and will result in a wine that is sharp tasting. Blueberry and gooseberries are both examples of fruit that require some dilution because of their natural acid levels. Take note that this is not the case with all fruits. Apples, for example, do not require any dilution. You may use pure apple juice with no worries.

The exact amount of fruit that you use to make your wine is dependent on a few factors. Really, there is not a single right formula when it comes to fruit amounts. If you want a dessert wine then you may wish to use more fruit in order to create a heavier, sweeter wine. On the other hand, if you want a wine that is lighter and crisper then you may wish to use less fruit.

In order to monitor and adjust the sugar levels as necessary when using fruits for your winemaking, it is necessary to use a hydrometer. The hydrometer will help you to easily determine the amount of sugar that is present in the juice and how much alcohol will be produce from the level of sugar that is present. This will aide you in understanding whether more sugar needs to be added to produce a higher alcohol content. A hydrometer is a tube of glass with a floating weight on one end. You will be able to gauge the sugar level by looking at how low or high the hydrometer floats once placed in the juice. Generally, there will be a meter on the hydrometer that indicates the alcohol potential.

You will also need to test and adjust the acidity as necessary when using fruits. This is imperative because acid levels can vary greatly among different types of fruits. There are two ways in which acid can be checked. One way is to use pH testing strips or litmus papers. This is generally a very fast and cheap way to check acid levels; however, it is not the most accurate way to check acid levels. The most accurate way to check acid levels is to use a process known as titration. A titration kit can be used to measure the acid level and how it will actually taste. If it is necessary to adjust the level of acid, you can do so using three different fruit acids. They are malic, citric and tartaric and they can be purchased either separately or in a blend known as Acid Blend. You can find these items in a home brewing store.

Author : Zul Affandy
Article From http://www.vikmall.com

One of the decisions you will need to make before you start your next batch of wine is whether you are going to use fruit or concentrates. Concentrates are often preferred by many beginners because they provide a rather easy way to produce very good wines quite consistently. This can be important if you are concerned about starting your first batch of wine and whether or not you will get good results.

You will notice when you purchase concentrates that easy to follow directions and recipes are contained right on the package. This means that even if this is your first batch, you will be able to follow the directions very easily and be assured that the final result will produce good wine.

Another advantage of using concentrates is that in most cases they will also include the other ingredients that you will need for your wine. These ingredients are typically already pre-measured and ready for you to use right away. This avoids the need to go out and purchase any other items as well as worrying over weather you have the measurements rights. If you are a novice winemaker, this can be a great advantage. Due to the fact that all of the guesswork has been taken out of the equation, a lot of the mistakes that first time winemakers tend to make are eliminated.

Many winemakers also prefer using concentrates because they offer far more variety that most winemakers would be able to achieve on their own if they were relying on either growing their own grapes or purchasing them. With concentrates you can purchase grape concentrates that hail from all over the world including such countries as France, Spain, Germany, Italy and Australia as well as many more. These options give you the opportunity to create an extensive variety of wines. In addition, you have the security of knowing that you can purchase concentrates and make wine at any time of the year; even during times when grapes are not normally in season.

The process of getting started using concentrates to make wine is quite easy. The first step is to simply pour the concentrate into whatever container you are using for fermentation and then add the appropriate amount of water. Next, add the yeast and any other ingredients that may be included and called for in the directions that accompanied the concentrate. In most cases, you will need to add about six gallons of water to the concentrate; however, this could vary from one specific concentrate to another so always be sure to refer to the directions carefully.

Next, you will need to siphon the wine from the sediment. This will usually need to occur from time to time; however, the directions will instruct you as to when this should be done. After this process is complete, the wine is ready to be bottled. From start to finish, the entire process usually takes from around 30 days to 45 days. The exact amount of time that may be required usually depends on the exact concentrate you are using.

You do not need a large amount of space to make wine from concentrates; another great advantage for many home winemakers. As long as you have a small space to dedicate to your winemaking it can be quite easy to get started making your own wine using concentrates.

Author : Zul Affandy
Article From http://www.vikmall.com

As you go along with the winemaking process there may come a time when you have a batch of fruit that you think would make a great batch of wine. If you do not have a recipe available you may be tempted to begin throwing some things together and creating your own wine recipe. If you have been making some wine for some time, this is not normally a problem as long as you may sure you include important additions such as sugar and yeast. There are a few important guidelines to keep in mind; however, in order to make sure that everything turns out well.

First, you will need to take into consideration how much produce must be used. If you have only made grape wine in the past you may be tempted to believe that you will be able to use the same amount of any other kind of produce that you use when making grape wine. This is not the case. The main reason why you may not be able to use the same amount of certain types of produce as grapes is the fact that some types of produce are stronger than others.

The goal is to make sure that you achieve balance in your wine. If you are using a produce that is very strong and/or contains a high amount of acid then you will need to make sure that you balance that with some water for dilution purposes. Generally, the stronger the fruit; the less of it you will need. If you used the same amount of elderberries to make a batch of wine as you use to make grape wine, you will likely end up with a batch of wine that is practically undrinkable.

In order to make up an average five gallon batch of wine; however, you will need to add enough water to constitute five full gallons. If you are using wine grapes, you typically do not need to add any water at all to make up your full five gallons. On the other hand, if you are using something like ginger root, which is a much stronger flavor, then you will need to use a good bit of water because you will typically be using less of the actual produce.

You will also need to decide how much, if any, sugar you need to add to your developing recipe. With a lot of produce, you may not actually need to add any sugar because the produce may have enough of its own to support the fermentation process. If you are not sure whether the produce you are using needs to have any sugar added, use a hydrometer to test the juice. This is a very simple and easy to use device that contains a scale referred to as the Potential Alcohol. This scale measures the potential amount of alcohol that can be produced from the juice in terms of percentages from zero to twenty. This will give you a good idea of how much alcohol can be produced from the sugar level that is already present in the must.

For example, if you get a reading of 4 on the hydrometer then you know you have enough sugar to produce 4% alcohol content in your wine. This is not enough alcohol for most people; so you would need to add some sugar. If you wanted to increase that level to around 12% then you will need to begin adding sugar gradually and testing at intervals until you test it and the hydrometer attains a reading of 12. In most cases, one pound of sugar will raise the alcohol level by approximately 1%. Do keep in mind that it is usually not a good idea to try to produce a wine that with an alcohol content of more than 13%; however, because higher alcohol contents could interfere with the stability and balance of the wine.

Author : Zul Affandy
Article From http://www.vikmall.com

Racking is one of the most essential parts to making stellar wine. Generally, you will need to rack the wine at least two times and in some cases you may need to rack it as many as four times. Making sure that you rack in a timely fashion will ensure the wine is properly clarified as well as prevent off flavors.

If you are not familiar with racking, it is important to understand that racking does not refer to bottling the wine. This is a misinterpretation. Basically, racking involves siphoning the wine from one container to another. The purpose behind this is making sure that all of the sediment is left behind.

The first racking typically occurs about five days into the fermentation process. In some cases, you may wait one to two days; however, the first racking should always occur by day 7. This is because by this time you will need to place an air lock on the container in order to protect the wine must due to the fact that the fermentation has slowed down. Outside contaminant could easily influence the wine, so you will need to provide necessary protection using an air lock.

You will also usually find that at this point in the fermentation process at least 70% of the sediment will have already begun to appear. If you rack between days five and seven, this will be a good opportunity to get rid of most of the sediment. It will be some time before the remainder of the sediment appears. Racking at this point is also important because it presents you with a chance to remove pulp from the must. This is imperative if you used fresh fruit instead of concentrate. If you leave pulp in the must for any longer, you may find that your wine has a harsh taste.

The second racking should take place when the fermentation process has been completed. The amount of time necessary for this to occur may vary. In some cases it may take only a few days following the first racking while in other cases it could be several weeks following the first racking. The amount of time depends on how quickly the fermentation progresses. After you have completed the second racking, do take care to re-apply the air lock as the must will still need some time in order to clear.

The third racking should take place after the wine has become completely clear. This will give you the chance to get rid of any remaining sediment. Under specific circumstances, you may find that it is necessary to perform subsequent rackings. For example, when you are aging a heavy red wine in bulk, you may find it necessary to rack the wine approximately every three months or so. This is because some sediment may still occur over the course of the wine being stored in bulk for a long period of time.

In the event you decide to use clarifiers or finings you may also need to perform subsequent rackings. In this case, you would need to rack the wine once before the wine is treated and then once again after treatment. It should be noted that it is entirely possible to rack your wine too many times. This should be avoided as it can cause the wine to become over-oxidized.

Author : Zul Affandy
Article From http://www.vikmall.com

Whether you are a beginning winemaker or you have been making wine for some time and have experienced some problems, it is important to understand the most common mistakes made in winemaking so you can learn how to avoid them.

By far, the most common problem in most winemaking failures can be attributed to equipment that is inadequate. Many people make the mistake of using common household items for their winemaking because they seem to be familiar to the carboys, spoons and air locks that are required for the process. It is important to note; however, that specific winemaking equipment is constructed of special materials. Using products made from other materials can have an impact on your finished wine.

In general, it is a mistake to attempt to reuse products that have previously held other items, especially foods. While you may believe that the container is clean, too frequently food odors will have become immersed into the plastic and as a result your wine may become tainted. In addition, it is not a good idea to use even brand new plastic pails due to the fact that the UV protectants that are used in the plastic could leak into the wine. It is far better to go ahead and invest the money necessary to purchase proper winemaking equipment so that you can be certain of the success of your wine.

Failing to follow instructions is another common mistake. The process for making wine may seem to some beginning winemakers to be complicated. As a result, there usually exists a strong urge to simplify the process. This is generally a mistake. If you are an experienced cook, you probably understand the necessity to follow the directions of a recipe. Veering from the recipe usually results in disaster. The same is true in winemaking.

The quality of your water can also impact the quality of your wine. Hard water or water that has a high mineral content can result in wine that has flavors that are somewhat off or even have somewhat of a haze. It is also important to know that water from a salt-exchange water softener should not be used for winemaking. To be certain of the best quality wine, it is usually best to use bottled water for your winemaking. The difference in the results will certainly be appreciable.

Proper yeast handling is also essential. Have you ever made homemade bread? Yeast must be moistened at the proper temperature in order to become activated. If the temperature is too cold, the yeast will fail to activate. If it is too hot, it will kill the yeast. This is because yeast is a living organism and it must be handled properly for success. As a result it is imperative to make sure that you maintain proper temperature control during the fermentation process. Ideally, it is best to try to maintain a temperature between 65 and 75 degrees Fahrenheit. Be certain the temperature remains consistent. If the temperature in your fermentation area is too cool, the formation process will take too long, which can lead to excess fizz in your wine.

Another common mistake is eliminating the sulfite in the wine. The most common reason for this is sulfite allergies. It is true that some people are allergic to sulfites; however, it is important to point out that even if you eliminate the sulfite from the wine the wine will still not be completely sulfite free due to the fact that the yeast always creates additional sulfites anyway. The purpose of the sulfites is to prevent spoiling and oxidation. In less than a month the wine will begin to taste somewhat off and in less than three months it will be rendered practically undrinkable.

Finally, make sure that you give your wine the proper amount of patience and time that it requires. Successful winemaking truly is an art form. In order to appreciate the results of your labor it really is best to wait the amount of time necessary for the wine to improve before you attempt to drink it. In far too many cases, beginner winemakers have believed they had a bad batch of wine when the problem was that they were trying to drink it too soon. Be patient and wait and you will appreciate the effort.

Author : Zul Affandy
Article From http://www.vikmall.com

The process of racking involves siphoning the wine away from the sediment. Sediment is primarily comprised of inactive or dead yeast cells. While yeast is beneficial to the must in the beginning, over time it becomes multiplied many times over. As each new generation of yeast is produced, older generations die off. Most of what you will see at the bottom of your fermentation container is dead yeast cells.

As the fermentation nears the end of the cycle, there should be a significant amount of active yeast cells which are beginning to wind down because they are running out of fuel; or sugar. After the sugars have become consumed the active yeast will begin to starve and feed on itself. An enzyme will be produced that will break down the inactive yeast cells. The purpose of this is to release the nutrients in the dead yeast cells that can be used by the yeast cells that are still active. This process is called autolysis. Over a period of time, an otherwise perfectly good batch of wine may be ruined as a result of this process.

Racking is also important because it can assist in the clarification of the wine. If wine is not racked, the end result will be wine that may be clear on top; however, the bottom will be somewhat thick and hazy.

The racking process is not terribly difficult. In fact, it is quite simple. A siphon is necessary for racking. The key; however, is to make sure that you siphon off the wine without stirring up any of the sediment. It should be noted that while food grade hosing can be used many winemakers do prefer to use what is known as a racking tube in order to rack their wine. This is because, if you are not careful; using a hose to rack the wine can cause the sediment to become stirred up and it may also move around. A racking tube fits on the end of the hose and serves as a type of wand that gives you control over where in the container you draw the wine.

In the old days, wine was racked by manually sucking on the end of the hose; however, today there have been numerous advancements made in winemaking equipment. One of those advancements is an automatic siphon that works with a pump in order to start the siphoning action.

Keep in mind that during the first two to three rackings, it is not essential to remove all of the sediment. You should try to siphon as much of the wine liquid as possible; however, even if you do bring up a small amount of the sediment this will be fine. It is during the final racking that it becomes imperative that you make sure that all of the sediment is left behind with none following through into the wine.

After the fermentation process has been completed, it you still need to rack the wine (such as when storing wine long-term in bulk) it may be necessary to add Campden Tablets to the wine. The purpose of this is to ensure that any air that may have entered the wine during the racking process is driven out. Campden Tablets will also help to minimize oxidation. Keep in mind that this is not a problem when racking wine while the fermentation process is ongoing as the CO2 that is produced during fermentation will naturally eliminate any air that may have been introduced.

Author : Zul Affandy
Article From http://www.vikmall.com